Genie Z-40N Boom |
|
|
|
|
Productivity
| Lift Capacity |
500 lbs (227 kg) |
| Platform Rotation |
180° |
| Vertical Jib Rotation |
130° |
| Horizontal Jib Rotation* |
180° |
| Drive Speed |
4.5 mph (7.2 km/h) |
| Gradeability |
30% |
| Weight Z-40/23N |
15,230 lbs (6,908 kg) |
| Weight Z-40/23N RJ |
15,300 lbs (6,940 kg) |
|
Measurements
| Working Height Maximum |
46 ft 5 in (14.32 m) |
| Platform Height Maximum |
40 ft 5 in (12.32 m) |
| Horizontal Reach Maximum |
22 ft 8 in (6.91 m) |
| Up and Over Clearance Maximum |
21 ft 3 in (6.48 m) |
| Width |
4 ft 11 in (1.5 m) |
| Platform Size |
3 ft 10 in (1.17 m) or
4ft 8 in (1.42 m) |
|
|
|
|
|
|
The new Z™-40N control system allows smooth, responsive operation of multiple
functions at the same time — from raise, lower and rotate to extend, steer and
drive. This revolutionary variable-speed technology delivers quick repositioning
within the Z™-40N’s entire range of motion. Proportional lift and drive controls
allow you to manage the speed of each function and make precise adjustments
in tight areas. Plus, Genie’s optional rotating jib moves 90° to each side.
Less demand on the batteries means longer battery charge life. The AC motors
and controller are sealed to protect against moisture and dust. On-board
diagnostics, simpler wiring and fewer parts make troubleshooting a breeze.
And easy-access panels save on repair time. Common service parts and
procedures across the Genie® Z™-boom line can also save you time and money.
